| Post 1 made on Thursday July 27, 2006 at 09:26 |
Is it possible to get them to work together someway?
Waveman light controller use the freq: 433.92Mhz
|
|
| Post 2 made on Thursday July 27, 2006 at 09:54 |
akirby Super Member |
Joined:
Posts: | March 2004
4,640 |
|
|
Only if the Waveman supports Z wave protocol. RF devices are prevented by law from using the same frequency to avoid unintentional interference, so the Harmony couldn't use the Waveman frequency even if it wanted to. I assume Z wave uses a single dedicated frequency with some command language on top of it to allow one RF device to directly control another.
|
|
| OP | Post 3 made on Thursday July 27, 2006 at 12:44 |
i does not use the z wave protocol. The RF frequency the H895 can control is 908.42 MHz.
|
|
| Post 4 made on Thursday July 27, 2006 at 13:03 |
akirby Super Member |
Joined:
Posts: | March 2004
4,640 |
|
|
The 895 can't control any RF devices that don't use Z wave protocol. The RF communication is between the remote and the base units only.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
