Hey Guys,
I have a strang thing happening. Has been like this forever, but not a really big issue. I have some inexpensive Commercial Elecric IR light controllers. The original remote works like this. Push the button once, and it turns on. Push again and it turns off. Push and hold, and it will dim up or down depending on where it is, either currently off or on. I have it in all my activities, and it works exactly as it is supposed to. However, when I go to device mode, it does not work. If you hold the button down, it will not transmit the signal continueously as it does in the activities. I don't use it much as a device so it hasn't been big on my priority list, but probably would if it work like I want. Any suggestions?

Take this into consideration.

1. In activities, you have the ability to customize the controls when the activity is activated (So to speak).

2. In each devices, you ALSO have the ability to customize the controls.

3. When an activity is initiated (active), the controls within it that is currently set will override the DEVICE controls.

By taking these considerations, you should now check the remote control settings from the activities section and then check to see what the controls are for that device. I bet you that they are different.

I could be wrong of course.