Post 1 made on Wednesday December 28, 2005 at 12:32 |
mromero Lurking Member |
Joined: Posts: | December 2005 4 |
|
|
I am trying to unlock a remote and the buttons on the monitor of a plasma tv. The manual says you have to use ASCII code with a RS-232C cable. The code is provided, but I am not sure of what software to use to get this done, or exactly how to type the code to send it. Does anyone know how this is done?
|
M Romero |
|
Post 2 made on Thursday December 29, 2005 at 08:39 |
Anthony Ultimate Member |
Joined: Posts: | May 2001 28,870 |
|
|
if it is ascii then my guess is that you could use Hyper terminal that comes bundled with windows under all programs/accessories and then possibly (depends on version) communication
|
... |
|
OP | Post 3 made on Thursday December 29, 2005 at 15:26 |
mromero Lurking Member |
Joined: Posts: | December 2005 4 |
|
|
It may be easier than I am making it out to be, but if it's not too much trouble how would I send the following command:
[k][m][ ][Set ID][ ][Data][Cr]
Data is 0 for Lock Off.
Thanks for your help. It is appreciated.
|
M Romero |
|
Post 4 made on Thursday December 29, 2005 at 18:11 |
Anthony Ultimate Member |
Joined: Posts: | May 2001 28,870 |
|
|
do you have a link to an online manual? or something? (i.e. somewhere for the code?)
|
... |
|
OP | Post 5 made on Friday December 30, 2005 at 12:30 |
mromero Lurking Member |
Joined: Posts: | December 2005 4 |
|
|
Here is the link to the online manual: [Link: lgcommercial.com]Pages 35-39 cover this subject. Command 13 on page 38 is what I am trying to solve. Thanks for all your help.
|
M Romero |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.