Hello.

As in the subject. I need help getting discrete codes for my Philips OLED 818 TV. I want to upload it to my Harmony 700. I asked Philips for help but the only thing they provided me were codes in RC5 format.

[Link: app.box.com]

Does anyone have discrete codes for this TV model or can convert them to hex pronto? Logitech support told me I need to give them the codes in hex pronto html format so they can add them to my harmony 700.

Thanks a lot for your help.

There is a fundamental problem in that one RC5 (or RC6) code does not correspond to one pronto hex signal, but two, due to the use of toggles. If you are using only one, some devices work perfectly fine, some work with restrictions, some basically do not work at all. I think Philips TVs work with restrictions; you will have a problem turning to channels like 11, 22, etc.

You can use IrScrutinizer to generate Pronto Hex for the RC5/RC6 signals: Select the "Render" pane, there select the appropriate protocol; the first number goes to "D", the second one to "F".

I don't know if I understood you correctly. Generally, I don't mean pressing the same button twice (11, 22, 33, etc.). What I care about most is a discrete command that directly calls the appropriate port (HDMI 1, HDMI 2, HDMI 3, HDMI 4).

As I wrote earlier, I received discretet commands in RC5 format from Philips. They cannot be generated from the original remote control. I need a program that will convert the RC5 code to Hex Pronto HTML without using the remote control.

Can this program do that? And where do I enter the RC5 code to convert it to Hex Pronto HTML?
For example, I have the following codes:

Ext 13.04 -> Hex Pronto HTML
Ext 20.57 -> Hex Pronto HTML
Ext 33.56 -> Hex Pronto HTML
Ext 43.57 -> Hex Pronto HTML
Ext 53.58 -> Hex Pronto HTML
Ext 63.06 -> Hex Pronto HTML
Ext 73.07 -> Hex Pronto HTML
Ext 83.08 -> Hex Pronto HTML

I have already answered:

what was it that you did not understand?

Did I do it right?

For such code in RC5, is this how it should look?

Ext 13.04 -> Hex Pronto HTML

[Link: ibb.co]

Yes. Perfect.

I have another question. Does anyone know how to upload hex pronto codes to the Logitech harmony remote? There was a guide on the AVS Forums but it is no longer up to date. I have been waiting for the previous code (power on, power off) that someone generated for me on another forum for 3 weeks.