Your Universal Remote Control Center
RemoteCentral.com
Discrete Code Hunter Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Need ROKU Code in CCP
This thread has 9 replies. Displaying all posts.
Post 1 made on Wednesday October 27, 2021 at 20:32
Debbie25
Long Time Member
Joined:
Posts:
March 2004
186
I have a MX900.
Within CCP I can find a 'Roku' listed under 'Aux' in the Database but they don't work.
I might be able to find individual Button Codes but how would I use them in CCP?

So is there a CCP file for Roku?
Post 2 made on Thursday October 28, 2021 at 12:23
goldenzrule
Loyal Member
Joined:
Posts:
July 2007
8,481
Roku Codesets work just fine that are in CCP.  Only issues I have seen in the past were the repeats caused the cursor to jump 2 spots.  Adjusting the repeats in for the directional buttons fixed that issue.


You don't have a Roku Stick, do you?  Those do not have IR and cannot be controlled with a MX900 are any CCP remotes (unless the MX5000, MX6000, or the CC App can control it via IP).
OP | Post 3 made on Thursday October 28, 2021 at 20:16
Debbie25
Long Time Member
Joined:
Posts:
March 2004
186
Yes, I have a Roku Stick 3600x.
I have read about the 'repeats' and have adjusted them also.
Didn't help so far.

Please explain the 'Roku Codeset'.
Post 4 made on Thursday October 28, 2021 at 23:48
edmund
Elite Member
Joined:
Posts:
April 2002
13,856
So the mx-900 will never control your roku stick, which wifi only, where the mx-900 only controls IR only devices. Upgrade the 3600 stck to something like express 4k+, which does accept IR commands and so your mx-900 will control it. If you want universal remote to control a roku, NEVER get a stick!!

Myself, I just bought two newest Roku sticks to be released, the 3820 & 3821, because I don't use universal remotes anymore, just the roku remotes. :)
Post 5 made on Friday October 29, 2021 at 09:11
goldenzrule
Loyal Member
Joined:
Posts:
July 2007
8,481
On October 28, 2021 at 20:16, Debbie25 said...
Yes, I have a Roku Stick 3600x.
I have read about the 'repeats' and have adjusted them also.
Didn't help so far.

Please explain the 'Roku Codeset'.

Like I said, you cannot control a Roku stick with a universal remote.  Not unless you get an IP based system.  Swap your Roku for an Ultra and you will be able to control it.
OP | Post 6 made on Friday October 29, 2021 at 22:45
Debbie25
Long Time Member
Joined:
Posts:
March 2004
186
I also have a IR/RF Base with an Extender.
Shouldn't that work?
I have also tried to do the 'Learn' (disconnecting the IR/RF Base first... but it fails.

I will most likely upgrade the Roku later down the road.
Post 7 made on Saturday October 30, 2021 at 15:20
goldenzrule
Loyal Member
Joined:
Posts:
July 2007
8,481
On October 29, 2021 at 22:45, Debbie25 said...
I also have a IR/RF Base with an Extender.
Shouldn't that work?
I have also tried to do the 'Learn' (disconnecting the IR/RF Base first... but it fails.

I will most likely upgrade the Roku later down the road.

No. You cannot control a stick period. You have to get a new Roku (non stick)
OP | Post 8 made on Saturday October 30, 2021 at 17:38
Debbie25
Long Time Member
Joined:
Posts:
March 2004
186
Thanks for letting me know.
I will be getting one because we want 'Voice'.
And I know we would have to use the Roku remote to get that feature.

It's just so teasing to see 'Roku' in the CCP Database but they don't work.
And then I see individual codes but I don't know what to do with them.
I have a bunch of Hex codes too but they don't wanna work either.
Now I know why.... I just love a challenge though.
Post 9 made on Sunday October 31, 2021 at 05:05
buzz
Super Member
Joined:
Posts:
May 2003
4,433
If you want a “challenge”, use a Raspberry PI, or similar, to receive IR commands, then translate them to IP commands.
OP | Post 10 made on Sunday October 31, 2021 at 16:52
Debbie25
Long Time Member
Joined:
Posts:
March 2004
186
Yes, I can build my own PC but that is a BIT over my head...... Good luck on that.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse