I'm looking for discrete codes for a Philips 16:9 LCD model# 17pf9946/37.

What I mainly need are the discrete codes for all of the inputs, plus all of the cursor functions (including select and exit); however, a full codeset is preferred.

If anyone has these codes or the capability to learn these codes and email them to me, it would be GREATLY appreciated. Even if you don't have access to this exact model, perhaps a similar model would work as well.. The format preferred is hexadecimal.

I have searched for these codes, called panasonic, and even checked ebay for a remote, but I'd rather not spend $36 just to get these codes. Any and all help is appreciated.

This is what the remote looks like: [Link: cgi.ebay.com]

You can use this Document and MakeHex to generate your own Hex Codes.

MakeHex
Makes clean IR sequences from IR protocol files. See the readme file for more information.
[Link: hifi-remote.com]

MakeHex GUI
[Link: hifi-remote.com]

Place both in the same folder.

1). In the MakeHex GUI select Protocol RC5.

2). Enter 0 into the Device Main a window.

3). Select Output Decimal.

4). Press Make Hex and open the !Output File.

5). Match (e.g. RC5 0.12 Standby) to Function 12 in the !Output File.


Cheers
Jason

Thanks. I did everything you said, but I have a question.

What you are saying is to match Function 12 to RC5 0.12 in the Remote control.doc file, which would be "standby", correct? That way I know which Function is which command..

How then do I match RC5 03.04 (AV1) to any of the Functions? It should be Function 0304 or something like that, right? I have only Functions 1-127...

Conversely, how do I match Function: 127 to anything in the RC5 Column? Function: 127 should be RC5 1.27 -- right? I don't have an RC5 1.27..

I'm probably just not understanding this correctly. Thanks for the help though

0 is the Device Number (Device Main A) and .12 is the Function Number 12.


You need to generate another Hex File (!Output File) but change the Device Main A to 3 instead of 0 (03 is the Device Number and .04 is Function Number 4).


Are you talking about the RC6 Codes?

I don't see any 0.127 Codes for RC5.

What remote are you using?