Can anyone help ? working on a project abroad and need the discreet source ir codes for the cambridge audio one+ have downloaded the ONE DX-1 IR protocol from cambridge and tried to use Make HEX to get them but only found CD, Power On and Off worked any help would be much appreciated

System Code = B0 4F (NEC Code)

DAB 0x01
FM 0x46
CD 0x47
SD 0x48
USB 0x49
BT 0x4A
IPOD 0x4B
AUX 0x4C


tried nec1,nec2,NECx1 and NECx2

do you want to post the codes that worked?

These are tested and work


CD
0000 0075 0022 0002 0140 00A0 0014 0014 0014 0014 0014 0014 0014 0014 0014 003C 0014 003C 0014 0014 0014 003C 0014 003C 0014 003C 0014 003C 0014 003C 0014 0014 0014 0014 0014 003C 0014 0014 0014 003C 0014 003C 0014 003C 0014 003C 0014 0014 0014 003C 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 003C 0014 0014 0014 003C 0014 003C 0014 0617 0140 0050 0014 0D95

Power On
0000 0075 0022 0002 0140 00A0 0014 0014 0014 0014 0014 0014 0014 0014 0014 003C 0014 003C 0014 0014 0014 003C 0014 003C 0014 003C 0014 003C 0014 003C 0014 0014 0014 0014 0014 003C 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 003C 0014 003C 0014 003C 0014 003C 0014 003C 0014 003C 0014 003C 0014 003C 0014 0617 0140 0050 0014 0D95

Power Off
0000 0075 0022 0002 0140 00A0 0014 0014 0014 0014 0014 0014 0014 0014 0014 003C 0014 003C 0014 0014 0014 003C 0014 003C 0014 003C 0014 003C 0014 003C 0014 0014 0014 0014 0014 003C 0014 0014 0014 0014 0014 0014 0014 003C 0014 0014 0014 0014 0014 0014 0014 003C 0014 0014 0014 003C 0014 003C 0014 0014 0014 003C 0014 003C 0014 003C 0014 0014 0014 003C 0014 0617 0140 0050 0014 0D95

use this:
[Link: monmailbox.com]
in the box, type in: B04F then leave a space and type in the command code, ie: for DAB 01, for FM 46 etc. click generate and away you go....
this should be the code for AUX (4C)
0000 006D 0022 0002 0155 00AA 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 05ED 0155 0055 0015 0E47

Thanks will try it in the morning ! when i import the code into Crestron Deal it shows a frequency of 38095 can this be changed as the learned codes are at 35714

Thanks again

you didn't post any learnt codes.
post one for comparison.
all NEC codes seem to be @ 38khz, however Makehex would allow you to generate codes at 36khz.
there should be some tolerance for the frequency, hopefully enough to let the 38khz work.

learning them straight into a crestron learner so dont see them as a HEX code nor can it be viewed once learnt. Will try these tommorrow and post up findings and any that work ! im suspect of the cambridge document as power on and off were the wrong way round !!

Thanks again

No That didnt work ! produced the same code as make HEX except the frequency was higher

you need to contact Cambridge i think, the codes are correct according to the document on their site and especially since the CD input code works ok.