Looking for hex codes for Toshiba DVR670 or what model codes are the same.

I tried using the DVR650, and the only functions that worked where the numbers and power. The other codes look to be on a different freq.

Thanks in advance

What remote are you using?

Can you not learn them?

If not, Can you Post some examples of the codes that work and don't work or a link to the file you tried?


Cheers
Jason

The remote was the SE-R0294. I was on site and didnt have the IR learner. It was a Crestron system. I used the DVR650 file from Crestron. I cant see the pronto hex format, but the header is 38 and the freq was 38095.

I dont know how to reverse Crestron format to pronto hex to get the other codes.

Can you try these Hex Codes and we can go from there?

All should be Power Toggle.

Device Code: 69.188 Function: 18
0000 006D 0022 0002 0157 00AC 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0689 0157 0056 0015 0E94

Device Code: 66.192 Function: 18
0000 006D 0022 0002 0157 00AC 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0689 0157 0056 0015 0E94

Device Code: 69 Function: 18
0000 006D 0022 0002 0157 00AC 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0689 0157 0056 0015 0E94


Cheers
Jason

Sorry for the delay, I havent been back on site to be able to test. The 1st code worked.

Can you explain to me how you got that info from what I told you. I am trying to learn more where the numbers came from. I have only used makehex once before.

More along the lines of how did my info help translate into something that makehex will understand and how do you know what function # does what function.

Thank you