| Post 1 made on Wednesday February 3, 2010 at 14:59 |
lgermanetti Long Time Member |
Joined:
Posts: | December 2008
26 |
|
|
Hello,
I ned to controll 5 Somfy blind from my remote control which is a Nevo Q-50 ( plus nevo connect).
The shades have to controlled separatly and so i need a bunch of codes which would do up/down/Stop for the specific channel I need to control.
I am using their RS-232 interface + IR immiter of course.
Does anybody have these codes or know how to get them?
I would really appreciate your help
Thanks
|
|
| Post 2 made on Wednesday February 3, 2010 at 19:08 |
Jasonvp Select Member |
Joined:
Posts: | July 2008
2,404 |
|
|
Have you looked here or contacted Somfy? Cheers Jason
|
|
| Post 3 made on Thursday March 25, 2010 at 21:02 |
koberlin1 Long Time Member |
Joined:
Posts: | August 2008
33 |
|
|
0101U is the command for UP with the Somfy RS232 interface set to address 1 and your blind on channel 1
0102M Stop command for the blind on channel 2
0103D Down command for the blind on channel 3
etc
just swap out the channel numbers for each of your blinds.
|
_____
Kent |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
