| Post 1 made on Saturday September 22, 2007 at 17:03 |
jonny Long Time Member |
Joined:
Posts: | November 2004
49 |
|
|
Hi All,
Does anyone have the discretes for this, yet?!! It will solve MANY of my installation issues!!
Dwayne
|
|
| Post 2 made on Monday September 24, 2007 at 01:50 |
HomeTheaterTech Long Time Member |
Joined:
Posts: | March 2005
53 |
|
|
There is none. Just feed a composite and s-video signal from the same device to the monitor and just use a workaround to get to the s-video input. Sometimes when the macro does not work you will at least have a picture from the composite input. Otherwise try specing out a different display next time. The 10uk has the same problem by the way. Here's another solution for you. Buy a s-video / composite board and install it into slot 1. Only 1 video input is active at a time when you do this. This will solve your discrete problem if you only need to use one of these video inputs. Wil Home Theater Tech
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
