| Post 1 made on Monday October 17, 2005 at 22:58 |
mmira Long Time Member |
Joined:
Posts: | October 2005
11 |
|
|
Hi all,
Do you happen to have discrete codes for the Philco TPF-3201V TV set or equivalent? I'm particularly interested in codes for :
PowerOn /PowerOff
Codes for each one of the input modes (antenna, video1, video2, etc)
Codes for each one of the screen types (normal, wide1, wide2, etc..)
Thank you!
|
miranda |
|
| OP | Post 2 made on Thursday October 20, 2005 at 00:54 |
mmira Long Time Member |
Joined:
Posts: | October 2005
11 |
|
|
Hi,
After reading some of the posts about how to find discrete codes using IRTool and MaheHex, I decided to try them. I've entered two codes learned from Pronto and that's what I've got from IRTool:
>>ScreenTypeToogle
Protocol:NEC1
Device:80
OBC:75
EFC:43
Carrier:006d
0:0016 0016
1:0016 003f
Raw:0155 00ab 0 0 0 0 1 0 1 0 1 1 1 1 0 1 0 1 1 1 0 1 0 0 1 0 0 0 1 0 1 1 0 1 0016 05f7 0155 0055 0016 00ab
>>InputToogle
Protocol:NEC1
Device:80
OBC:9
EFC:57
Carrier:006d
0:0015 0015
1:0015 0040
Raw:0155 00ac 0 0 0 0 1 0 1 0 1 1 1 1 0 1 0 1 1 0 0 1 0 0 0 0 0 1 1 0 1 1 1 1 0015 05f8 0155 0055 0015 00ac
Then, I've entered the device in the nec1.irp and generated the hex file using MakeHex with all of the 255 IR codes. Surprise, surprise, none of the original codes were in there.
The first original code starts with :0000 006d 0024 0000 0155 00ab
The second original code starts with :0000 006d 0024 0000 0155 00ac
and all of the codes generated by MakeHex starts with : 0000 006D 0022 0002 0157 00AC
What am I doing wrong?? Maybe I have to do some extra configuration in the IRP file?
|
miranda |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
