| Post 1 made on Wednesday February 23, 2005 at 13:10 |
From my search I suspect I am out of luck, but can the zone 2 volume on this receiver be controlled via a remote?
|
|
| Post 2 made on Saturday July 9, 2005 at 07:12 |
Don't know about DS-787, but my TX-NR80E doesn't provide volume control in Zone 2. Since the Zone 2 outputs ar high impedance, not speaker outputs, it assumes that you have volume control on whatever you are using to drive your Zone 2 speakers. In my case these are powered speakers with their own volume controls.
|
Regards,
rsbrux |
|
| Post 3 made on Sunday July 10, 2005 at 01:41 |
hdsystems Long Time Member |
Joined:
Posts: | February 2005
146 |
|
|
The DS-787 isn't compatible with discrete zone 2 commands. If you have a zone 2 button on the remote try pressing it, then use level up and down (not volume up and down). Make sure that zone 2 is configured as "variable".
Good Luck
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
