Post 1 made on Sunday March 12, 2023 at 10:09 |
highfigh Loyal Member |
Joined: Posts: | September 2004 8,321 |
|
|
I know of someone whose GXR2 is failing and they need a replacement of some kind. The easy way to do this might be to just find a replacement as long as they can find someone to clone the program, but since the speaker wires are connected at the head end, options are available.
I never installed this system- do the speaker wires pass through the same box as the control pads?
|
My mechanic told me, "I couldn't repair your brakes, so I made your horn louder." |
|
Post 2 made on Sunday March 12, 2023 at 22:04 |
Glackowitz RC Moderator |
Joined: Posts: | May 2002 3,793 |
|
|
I might have one in warehouse we pulled out of a working system. Do you need any cards with it? Think we have one of each and a few of the audio cards for expansion.
|
There's no worse feeling than that millisecond you're sure you are going to die after leaning your chair back a little too far. |
|
Post 3 made on Monday March 13, 2023 at 14:41 |
goldenzrule Loyal Member |
Joined: Posts: | July 2007 8,474 |
|
|
I had one of those sitting on my shelf for probably several years before I took it to the dump last year. Bummer
|
|
Post 4 made on Tuesday March 14, 2023 at 16:08 |
wildulmer Long Time Member |
Joined: Posts: | June 2007 272 |
|
|
We dumped our stock as well. Even if you have the chassis you still need the cards and you will need to program it. To connect your computer to the chassis you will also need the USB IR learner, it acts as a hardware key. If you do not have the USB device the software will not connect to the chassis.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.