Your Universal Remote Control Center
RemoteCentral.com
NEWS
REVIEWS
FEATURES
FILES
FORUMS
Custom Installers' Lounge Forum - View Post
Previous section Next section Up level
Find remotes at:
Amazon.com
What's New
Read more news »
New Reviews
Up level
[ SEARCH ]
[ CONTACT ]
The following page was printed from RemoteCentral.com:

Forums > CI World > Custom Installers' Lounge
DMX Control from Homeworks QS
Login:
Pass:
Register
 
Forum Search
 
Login

Topic:
DMX Control from Homeworks QS
This thread has 7 replies. Displaying all posts.
Post 1 made on Monday February 11, 2013 at 15:30
MacrossZero
Active Member
Joined:
Posts:		March 2009
594
I have a part number from Homeworks QS called a QSE-CI-DMX and would like to integrate this to control some LED Strip Lights in both color and intensity driven from the audio source in the room.  Does anyone have any experience doing this, or know of this being done?  TIA
Do or Do not, There is no Try.
Reply
Post 2 made on Monday February 11, 2013 at 15:58
SOUND.SD
Loyal Member
Joined:
Posts:		April 2006
5,523
Whats the questions? Do you want to use this inside of a homeworks systems or stand alone? 3rd party controller or just ambient sound?

I have used similar controllers integrated with RTI but never as part of a lighting system.
Bulldog AV - San Diego, CA
www.bulldog-av.com
[Link: facebook.com]
Reply
OP | Post 3 made on Monday February 11, 2013 at 16:43
MacrossZero
Active Member
Joined:
Posts:		March 2009
594
Would like to take the intensity of the volume and represent that with ether a serial interface or DMX, whichever is more cost effective.  Looking to use Led Strips in 1ft increments to show volume levels in realtime.
Do or Do not, There is no Try.
Reply
Post 4 made on Monday February 11, 2013 at 18:54
DeuceTrinal
Long Time Member
Joined:
Posts:		January 2010
448
So the lutron is driving the LED strips? Or they are DMX enabled LEDs, and you want the lutron to control them via DMX?
There is probably a standalone DJ system that could do what you want. 
More zip ties!
Reply
OP | Post 5 made on Tuesday February 12, 2013 at 14:29
MacrossZero
Active Member
Joined:
Posts:		March 2009
594
We are looking at nuleds, they have a controller, and slave controllers that can be attached to the same control wire, All I have to do is figure out how we are going to activate each segment via the SPL in the room.
Do or Do not, There is no Try.
Reply
Post 6 made on Tuesday February 12, 2013 at 14:36
edizzle
Loyal Member
Joined:
Posts:		March 2005
5,916
[Link: pulsarlight.com]
I love supporting product that supports me!
Reply
Post 7 made on Friday November 22, 2013 at 22:05
joaolyra
Long Time Member
Joined:
Posts:		April 2007
27
Did you have success?
I want to do the same. Can one QSE-CI-DMX control three of this?
[Link: dx.com]
And about the audio sensitivity? is it possible?
Thanks


On February 11, 2013 at 15:30, MacrossZero said...
I have a part number from Homeworks QS called a QSE-CI-DMX and would like to integrate this to control some LED Strip Lights in both color and intensity driven from the audio source in the room.  Does anyone have any experience doing this, or know of this being done?  TIA
Reply
Post 8 made on Saturday November 23, 2013 at 09:48
GotGame
Super Member
Joined:
Posts:		February 2002
4,008
You may consider using an Arduino controller and some LED strip Tape lights.

Not sure how you are going to analyze and break the audio spectrum and add that to a Lutron controller to create DMX levels.

Found this from
I may be schizophrenic, but at least I have each other.
Reply


Return to thread index...
Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Register for an account

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse