| Post 1 made on Wednesday November 21, 2012 at 13:24 |
RADIO RAHIM Advanced Member |
Joined:
Posts: | August 2005
799 |
|
|
So I am controlling an Pioneer Pro 60/70x5fd IP control. I am able to turn the TV OFF, but when I send the command to turn ON, nothing happens. Is there a wake on lane setting or something?
I am using a One-Way Elan g! driver, which works for everything else, even the OFF command.
|
|
| Post 2 made on Wednesday November 21, 2012 at 14:24 |
MacrossZero Active Member |
Joined:
Posts: | March 2009
594 |
|
|
Is this the sharp LCD in Elite clothing? If so there is a firmware update to fix the issue that you are experiencing.
|
Do or Do not, There is no Try. |
|
| Post 3 made on Wednesday November 21, 2012 at 15:53 |
NSP01 Advanced Member |
Joined:
Posts: | March 2005
834 |
|
|
IP control?
You have to send the Port On command first then Power On.
A bit confusing but the command is listed first in the manual.
|
They call me the "Thread Killer". Just watch! |
|
| OP | Post 4 made on Thursday November 22, 2012 at 03:10 |
RADIO RAHIM Advanced Member |
Joined:
Posts: | August 2005
799 |
|
|
Yes this is the Elite/ Sharp.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
