|
|
 |
|
The following page was printed from RemoteCentral.com:
| Topic: | ccp update This thread has 20 replies. Displaying posts 1 through 15. |
|
| Post 1 made on Thursday March 24, 2011 at 10:44 |
cb1 Select Member |
Joined:
Posts: | September 2002
1,663 |
|
|
Trying to update (scary) it says "update is available, software will be restarted"
Then it doesnt do anything. Never seen this before
|
why have a nice system if you cant operate it, program the remote the right way the FIRST time! |
|
| Post 2 made on Thursday March 24, 2011 at 10:53 |
Robert Parker Senior Member |
Joined:
Posts: | March 2004
1,486 |
|
|
I just tried and it worked for me. Did it run the update and hang or just hang? Do you still have internet? Also at the end of the update a box pops up that you must click on to move forward. Could this box be behind something else? That has bit me before.
HTH
|
Clatto Verata... Necktie |
|
| Post 3 made on Thursday March 24, 2011 at 18:05 |
highfigh Loyal Member |
Joined:
Posts: | September 2004
8,192 |
|
|
On March 24, 2011 at 10:44, cb1 said...
Trying to update (scary) it says "update is available, software will be restarted"
Then it doesnt do anything. Never seen this before If you're using FireFox, look at the area below the normal header on the display for a box asking if you want to allow the application.
|
My mechanic told me, "I couldn't repair your brakes, so I made your horn louder." |
|
| Post 4 made on Thursday March 24, 2011 at 21:56 |
Stryker Long Time Member |
Joined:
Posts: | November 2010
402 |
|
|
What version of windows are you running. If windows 7/vista make sue your running ccp as administrator
|
"If they give you ruled paper, write the other way" |
|
| OP | Post 5 made on Thursday March 24, 2011 at 22:16 |
cb1 Select Member |
Joined:
Posts: | September 2002
1,663 |
|
|
Stryker, You nailed it!
|
why have a nice system if you cant operate it, program the remote the right way the FIRST time! |
|
| Post 6 made on Thursday March 24, 2011 at 22:21 |
Hasbeen Loyal Member |
Joined:
Posts: | November 2007
5,272 |
|
|
I had the exact same thing happen to me last night. I turned off my firewall and logged in as administrator and it worked.
I'm using windows 7.
Then I started programming a MX880. Programmed it for a couple hrs last night, and a few hrs today at the customers house.
All of the sudden, it would no longer download, kept getting download failures, Cannot find device driver...Turned into a disaster.
Called Tech Support, they said.."Bad remote"... I tried different usb ports, rebooting machine and ccp, everything.
I drive 40 minutes 1 way, go get a new one...plug it in same thing..no way in hell 2 bad remotes..call Tech support back...
guy says try the usb from the remote you just picked up...Bingo. Problem fixed.
Who woulda thunk. 1st USB came right out of the box with the remote.
|
|
|
| Post 7 made on Thursday March 24, 2011 at 23:20 |
Stryker Long Time Member |
Joined:
Posts: | November 2010
402 |
|
|
No Worries, Had the same issue when I moved to Windows 7 (Skipped Vista). Took me a day to figure out. USB cables, Ive found the cables that come with the 980 to be extreamly reliable but I have had an issue here or there, I carry a 2' USB cable and have never had an issue not once with it. Not sure if its a voltage thing, an undercharged remote or what but Thats why I carry it, just in case, Also as has been covered well here the driver issue with CCP and URC remotes in Vista and Windows 7, Ive had to go through the full steps a couple of times on the same machine just when I have used a different USB port than previous used,
Last edited by Stryker on March 24, 2011 23:29.
|
"If they give you ruled paper, write the other way" |
|
| Post 8 made on Tuesday January 3, 2012 at 16:14 |
GotGame Super Member |
Joined:
Posts: | February 2002
4,008 |
|
|
What happened to all the IR data for projectors?
I just reinstalled another copy of CCP on my desktop and the Projector IR data has nothing under the brand window.
|
I may be schizophrenic, but at least I have each other. |
|
| Post 9 made on Tuesday January 3, 2012 at 16:17 |
Impaqt RC Moderator |
Joined:
Posts: | October 2002
6,201 |
|
|
Projectors have always been under TV's in CCP.....
|
|
|
| Post 10 made on Tuesday January 3, 2012 at 16:19 |
Duct Tape Loyal Member |
Joined:
Posts: | November 2008
5,224 |
|
|
On January 3, 2012 at 16:17, Impaqt said...
Projectors have always been under TV's in CCP..... why is there an option for projectors?
|
|
|
| Post 11 made on Tuesday January 3, 2012 at 16:32 |
Impaqt RC Moderator |
Joined:
Posts: | October 2002
6,201 |
|
|
On January 3, 2012 at 16:19, Duct Tape said...
why is there an option for projectors? Probably the same reason C4 has "Televisions" and "Plasma Televisions" listed as 2 separate things... I just updated my CCP and I now have the Projector section as well.... Pretty sure its new.. Maybe they are going to start dividing them out in the future?
|
|
|
| Post 12 made on Tuesday January 3, 2012 at 17:02 |
Trunk-Slammer -Supreme Loyal Member |
Joined:
Posts: | November 2003
7,429 |
|
|
I've had a lot of bad cables.
I'm thinking that the wires are tiny, and they get broken during packaging.
Have to hold the remote just so.... Get the Avon calling ding dong, and load the program before you lose the connection.... ;-)
|
|
| Post 13 made on Tuesday January 3, 2012 at 17:36 |
Impaqt RC Moderator |
Joined:
Posts: | October 2002
6,201 |
|
|
On January 3, 2012 at 17:02, Trunk-Slammer -Supreme said...
I've had a lot of bad cables.
I'm thinking that the wires are tiny, and they get broken during packaging.
Have to hold the remote just so.... Get the Avon calling ding dong, and load the program before you lose the connection.... ;-) The cable issue was from March.....
|
|
|
| Post 14 made on Tuesday January 3, 2012 at 17:45 |
Ernie Gilman Yes, That Ernie! |
Joined:
Posts: | December 2001
30,076 |
|
|
On January 3, 2012 at 16:17, Impaqt said...
Projectors have always been under TV's in CCP..... Are you saying that they reworked the database? I've found in some manufacturers that there are, say, LCD categories but some LCDs are listed under televisions... has this been fixed too?
|
A good answer is easier with a clear question giving the make and model of everything.
"The biggest problem in communication is the illusion that it has taken place." -- G. “Bernie” Shaw |
|
| Post 15 made on Tuesday January 3, 2012 at 18:10 |
Impaqt RC Moderator |
Joined:
Posts: | October 2002
6,201 |
|
|
On January 3, 2012 at 17:45, Ernie Gilman said...
Are you saying that they reworked the database? I've found in some manufacturers that there are, say, LCD categories but some LCDs are listed under televisions... has this been fixed too? The C4 Database? Hell no. Its totally screwy. Drives me insane that they still dont realize there are functional differences between Blu-Ray and Standard DVD Players..... I dont do a ton of CCP myself, But I always remembered the "TV" category held all the video display devices. Today, there is indeed a "Projector" category... and its empty.....
|
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
