Your Universal Remote Control Center
RemoteCentral.com
Custom Installers' Lounge Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
IP Camera reccomendation
This thread has 12 replies. Displaying all posts.
Post 1 made on Tuesday January 25, 2011 at 08:41
Jimmy Bellagio
Advanced Member
Joined:
Posts:
January 2008
854
Anyone know if a suitable product exists where someone could wire a camera directly to their TV set just for viewing purpose? Would be great to also have IP control, but no DVR is needed and customer just wants to keep an eye on reception when he is in the back working in the office. Wants to use his Plasma, not the computer in most cases.
James S. Bellagio
Post 2 made on Tuesday January 25, 2011 at 09:17
Rob Grabon
Founding Member
Joined:
Posts:
November 2001
1,392
Panasonic IP cameras have video and audio line outs, IP control, and SD card recording.
Technology is cheap, Time is expensive.
Post 3 made on Tuesday January 25, 2011 at 09:32
Fred Harding
Super Member
Joined:
Posts:
October 2001
3,430
What he said.

Not all have that feature, but some do.
On the West Coast of Wisconsin
Post 4 made on Tuesday January 25, 2011 at 09:35
juiter
Long Time Member
Joined:
Posts:
July 2009
10
Thanks for sharing. Can you list some models that has these kind of features? Or do all of them have?

On January 25, 2011 at 09:17, Rob Grabon said...
Panasonic IP cameras have video and audio line outs, IP control, and SD card recording.
...
Post 5 made on Tuesday January 25, 2011 at 09:38
Royd Hanson
Long Time Member
Joined:
Posts:
September 2008
24
Panasonic BLC-210A IP camera can be viewed/controlled directly by Panasonic G25 and up model TV's. (Right from the TV remote) As long as both are on the same network.
Post 6 made on Tuesday January 25, 2011 at 09:39
edizzle
Loyal Member
Joined:
Posts:
March 2005
5,916
you dont need an ip camera to wire directly to tv. in fact you would save considerable money by using standard composite video camera wired directly to tv. if you want an ip camera obviously the model listed above gives both standard outputs and ip which sounds good or if he has network enabled TV you could research what the strea,ing capability of the set is and if there is any way to stream the feed from camera to TV via ip, maybe dlna.
I love supporting product that supports me!
Post 7 made on Tuesday January 25, 2011 at 10:38
Active Member
Joined:
Posts:
November 2009
610
I've used Axis in the past with good success...

http://www.axis.com
Trent Mulligan
Just Add Power: Manufacturer - HD over IP solutions
www.justaddpower.com | [Link: twitter.com] | [Link: facebook.com]
Post 8 made on Tuesday January 25, 2011 at 10:47
vbova27
Super Member
Joined:
Posts:
July 2006
2,987
I don't think the BLC-210A has an audio and video out. While it is true that you can view it with a Viera Plasma via VieraLink, the process is QUITE annoying. First and foremost, the screen goes into screensaver mode within a few minutes and there is no way to adjust this as far as I know (feel free if someone knows otherwise). But I don't think there is any way to wire this directly to a TV .
Post 9 made on Tuesday January 25, 2011 at 11:09
tgrugett
Select Member
Joined:
Posts:
August 2004
1,847
On January 25, 2011 at 08:41, Jimmy Bellagio said...
Anyone know if a suitable product exists where someone could wire a camera directly to their TV set just for viewing purpose? Would be great to also have IP control, but no DVR is needed and customer just wants to keep an eye on reception when he is in the back working in the office. Wants to use his Plasma, not the computer in most cases

You need to contend with the crossover issue and static IPs if you are going to hook up directly to the set. Usually one would have them both on an LAN network.
OP | Post 10 made on Tuesday January 25, 2011 at 11:41
Jimmy Bellagio
Advanced Member
Joined:
Posts:
January 2008
854
Thanks for the input, but let me give some more info - the customer wants a camera that he can watch on his TV. He already has an OLDER LG Plasma. He needs to be able to watch his reception area on his TV 85% of the time. The other 15% of the time it would be best for him to access over a laptop. He does not want a DVR as he is not interested in recording video. This is just to keep an eye on things. Is there a simple way to do this without going through the whole DVR thing?
James S. Bellagio
Post 11 made on Tuesday January 25, 2011 at 12:15
2nd rick
Super Member
Joined:
Posts:
August 2002
4,521
Channel Vision's 6521 (vandal-proof dome w/ IR) and 6522 (bullet cam w/ IR) are 1600x1200 (aka 2 megapixel) IP cameras with audio out as well as composite/baseband out to go to a local monitor and/or an analog input on a DVR.

[Link: channelvision.com]

[Link: channelvision.com]
Rick Murphy
Troy, MI
Post 12 made on Tuesday January 25, 2011 at 12:23
brandenpro
Select Member
Joined:
Posts:
May 2005
1,651
Panasonic also has a TV interface box for the cameras.
Post 13 made on Tuesday January 25, 2011 at 18:00
Fred Harding
Super Member
Joined:
Posts:
October 2001
3,430
Brandenpro: Panasonic has retired that box. NLA
On the West Coast of Wisconsin


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse