| Post 1 made on Friday January 21, 2011 at 16:26 |
andrewinboulder Select Member |
Joined:
Posts: | August 2003
1,515 |
|
|
A quick search proved fruitless.
They all seem to be 4-5 inches deep.
Are there any that are lower profile for smaller projectors. (Epson 705HD).
|
|
| Post 2 made on Friday January 21, 2011 at 17:09 |
toadh8r Long Time Member |
Joined:
Posts: | April 2007
67 |
|
|
check out pdrmounts.com... their universal projector models can be flush mounted...
|
|
| OP | Post 3 made on Saturday January 22, 2011 at 09:14 |
andrewinboulder Select Member |
Joined:
Posts: | August 2003
1,515 |
|
|
Hmmm,
Went to their website and all the mounts look pretty standard.
Am I missing something?
|
|
| Post 4 made on Saturday January 22, 2011 at 10:43 |
kgossen Super Member |
Joined:
Posts: | March 2008
3,026 |
|
|
How low profile do you need? I think Premier has one that can be a short as 2.8" but that's about it.
|
"Quality isn't expensive, it's Priceless!" |
|
| Post 5 made on Saturday January 22, 2011 at 14:33 |
cpchillin Select Member |
Joined:
Posts: | September 2007
2,239 |
|
|
What are you mounting it to? I've taken chiefs' projector specific mounting plate attached to a floor flange above a drop ceiling and the projector was less then 2" from the ceiling.
After looking at the specs of that projector it only weighs 5 lbs. You could just velcro it to the ceiling, which I wouldn't do. Or make your own mount out of 1/8" aluminum strips and mount it as close to the ceiling as you want.
|
Who says you can't put 61" plasmas up on cantilever mounts using toggle bolts? <---Thanks Ernie ;) |
|
| OP | Post 6 made on Saturday January 22, 2011 at 15:09 |
andrewinboulder Select Member |
Joined:
Posts: | August 2003
1,515 |
|
|
Thanks for the premier suggestion! That is lower profile than the others.
I like the other suggestion too, although I cannot do it in this scenario.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
