| Post 1 made on Monday July 19, 2010 at 13:58 |
Fiasco Senior Member |
Joined:
Posts: | July 2009
1,264 |
|
|
Two rooms, each had a hard wired fan/light combo with no wall switch and switched on or off w/ pull chains at the fan. These fans are being replaced with light fixtures.
Options are to pull a switch leg and cut into the drywall or some type of remote system.
The fixture canopies are not very big so a remote switching option would have to be able to fit inside the canopy.
For the remote switch, there is a neutral in the existing wall switch box (which switches a couple 1/2 receptacles) so a two gang wall box can be cut in and a 120v powered remote switch would be acceptable.
Options?
|
Pump House on Facebook: [Link: facebook.com] |
|
| Post 2 made on Monday July 19, 2010 at 16:42 |
Totem Long Time Member |
Joined:
Posts: | January 2009
467 |
|
|
|
| OP | Post 3 made on Monday July 19, 2010 at 17:27 |
Fiasco Senior Member |
Joined:
Posts: | July 2009
1,264 |
|
|
On July 19, 2010 at 16:42, Totem said...
Thanks totem, that's nearly perfect. I also found these [Link: adhocelectronics.com]I guess the big question would be of the quality of the device.
|
Pump House on Facebook: [Link: facebook.com] |
|
| Post 4 made on Tuesday July 20, 2010 at 09:20 |
Totem Long Time Member |
Joined:
Posts: | January 2009
467 |
|
|
I have used the Lighting Switch products and they work quite well.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
