No, as copy/paste leaves too much room for error, please check for file DuneStatus2a.xcf file I sent a few minutes back.

Got it, and it locks up all three on my remotes, just like before, and yes I double checked the IP that I did not add the period again, lol

I shouldn't say locked up for I could still turn the screen back on after it timed out, Besides changing the IP for my dune, configuring it to my WiFi, I also set the power button to "Jump to Home". Once uploaded to the remote, that button also did not work. I cant swear but I thought I did see data flash very quickly, then back to blank fields, I could not see what said data was. Still works just fine in my Simulator as well.

Ok. In the simulator what is the protocol version? And as I’ve asked before, can you use a browser and copy everything you see on the browser screen and send to me in a text file to my email?

will do, give me a few days to get the data sent over, got a lot going on, as far as the simulator goes i have vs 1.4.6.14205

However I have posted earlier what I believe you are asking for,

< command_result>
< param name="protocol_version" value="6"/>
< param name="phv_md5" value="D41D8CD98F00B204E9800998ECF8427E"/>
< param name="pltv_enabled" value="0"/>
< param name="playback_caption" value="Dazed and Confused (1 of 19)"/>
< param name="playback_extra_caption" value="Last Day of School, May 28, 1976, 1:05 p.m."/>
< param name="md5" value="AA82118DFFF0E8AC5393DA2259966DA5"/>
< param name="product_id" value="tv175v"/>
< param name="serial_number" value="0000-0001-6075-9349-5201-249D-8928-B3B3"/>
< param name="firmware_version" value="240123_0207_r22"/>
< param name="commercial_serial_number" value="EC175V001232100148"/>
< param name="product_name" value="Pro Vision 4K Solo"/>
< /command_result>
there can be over a 100 lines of returned date based on how many sound tracks and or subtitles the file has. Of course minus the space following the very first <. What I pasted above is what I see from Edge browser.

I dont think Simulator version has bearing but curious as to how you got that info. When I run PEP2, the Application on the Info screen shows as -.

You are running protocol version 6 which is 2 versions ahead of what I have for my Dune. The only way i'll be able to troubleshoot anything for you would be for you to copy what you see in Edge and put into a text file and email me. I want the text file so that I can run locally on my system here using data from your Dune Player.

Get that to me when you run into a problem in the Simulator and we'll go from there. Without that file, any help I can provide will be very, very limited.

Info for the simulator, is click on Help, then about. As posted above its Protocol 6

I don't understand why you need a text file when I already posted what is displayed in a web browser two times, Not sure what your looking for? It always vary depending on how many audio tracks the file has and or how many subtitles the file contains. Besides that its all the same format just different number of lines. How ever when I get some time I will email it to you,

Thanks again for all your help.
Mike

M,
Not trying to be difficult here. Many of the fields I see on my Dune in protocol 4 are not present in the data you pasted above for protocol 6.

For example, protocol 4 has a param named "player_state". I don't see that above in your data.

There should be no problems processing the text you pasted above on the remote as far as I can tell.

In fact, I took the raw data you pasted above and with previous (prior to DuneStatus2a.xcf) config files you received, there was an error in my printLine function. However, as DuneStatus2a.xcf had the line

printLine(playerStatus)

commented out (the source of an error), Injecting your raw data in for the response from dune, , I able to see the Dazed And Confused label along with the protocol version of 6 displayed both in the simulator and on a TSU9600 remote.

Not sure why you cannot get this working on your remote. You might want to experiment using try/catch within the 'callback' function to be sure to catch any errors that might be thrown. Here's an example which I believe you've seen before.

[Link: remotecentral.com]

Happy to help with this over a phone call as doing it here does not seem to be making good forward progress.

Lyndel

M,

I'm seeing that beginning with Protocol Version 5 of Dune, results can be returned in JSON format which makes it much easier to parse (JSON libraries are really simple and the E4X for XML is very outdated)

All commands can now return responses in JSON format -- when
"result_syntax=json" parameter is specified.

[Link: dune-hd.com]

I was going to provide my old Dune Javascript file that I used for parsing Dune XML, but the last time I used it was 2012 with Protocol version 3, so I suppose it's outdated by now...

Feel free to post it. Protocol Version 4 is also very limited, especially if you look at the content pasted above. For MG, I wrote prontoscript that will use E4X to convert the values into a JavaScript object with named properties.

The irony of this whole exercise is that beginning with Protocol Version 5, Dune supports JSON natively eliminating the need for E4X. If only my Dune Solo 4K supported version 5.

Lyndel

I did "Upload File" in the Files > Pronto Professional > ProntoScripts page. Hope that was the right place. Then, I replied to the resulting email with the file com.randman.dune.zip, which contains a ProntoScript file that I used for communicating with Dune. I used it with three of the Dune HD Smart D1 Media Players. I haven't used it in a while though (maybe since mid to late 2010's), but worked well for me back then.

You may need to RC Mail Daniel to get it posted.

I forwarded the email to Daniel last Wednesday. I don't see it in the Files section yet.