JohnMack,

I believe the correct ini file for the JVC line of projectors is as follows (this is specifically for the JVC RS2-DLA which I own), but I believe they are all the same.

[System]
Manufacturer=JVC
Model=DLA-RS2

[Protocol]
Protocol=JVC
Modulation=PWM
Bit Order =LSB
Frequency=40000
Time Base=500
One=1,-3
Zero=1,-1
Once Form=[17 -8],d:8,f:8,[1 -45],d:8,f:8,[1 -100]
Repeat=1

[Commands]
Power = 115; Off:6, On:5
Input = 115; HDMI1:112, HDMI2:113, Component:77, Composite:75, S-Video:76
Cursor = 115; Up:1, Down:2, Left:54, Right:52, Enter:47
Color = 115; Plus:124, Minus:125
Sharp = 115; Plus:226, Minus:127
Contrast = 115; Plus:120, Minus:121
Brightness = 115; Plus:122, Minus:123
Aspect Cycle = 115; 119
Profile = 115; Cinema:105, Natural:106, Dynamic:107, User1:108, User2:109, User3,110
Gamma Adjust = 115; 117
Color Temp = 115; 118
Info = 115; 116
Hide = 115; 29
Menu = 115; 46
Exit = 115; 3
Test = 115; 89
Light = 115; 7

Note: I show the IR frequency as 40,000. The pattern is actually repeated twice in the form and this is exactly what the JVC remote for the RS2 projector produces. The ^n notation directs the program to set the last off time so that the total message takes n microseconds. Sony uses this (^45000), I do not believe JVC does. if it does not operate on your PJ change the frequency to 38000.

Let me know how it works out.

Barry

Thanks for this .ini.

I've ordered a USB-UIRT so that I can test this (and any subsequent playing with IR) from my laptop rather than having to keep downloading to the Pronto from this PC and running between rooms.

I'll let you know how I get on.

John