Your Universal Remote Control Center
RemoteCentral.com
Crestron Control Systems Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Crestron Fan-Coil Thermostat replacement
This thread has 4 replies. Displaying all posts.
Post 1 made on Saturday October 3, 2020 at 07:19
Krassyg
Long Time Member
Joined:
Posts:
April 2005
264
I have a client who wants to replace these thermostats:

[Link: crestron.com]

To complicate things they are installed in closets with remote temp/humidity sensors.

I can't seem to find anything that does both Fan-Coil and remote sensors. Does Crestron make these themselves or they are OEM from another company?

Last edited by Krassyg on October 3, 2020 07:36.
Post 2 made on Saturday October 3, 2020 at 14:46
kgossen
Super Member
Joined:
Posts:
March 2008
3,026
You'll have to replace the sensors as well as they will only work with Crestron.
"Quality isn't expensive, it's Priceless!"
OP | Post 3 made on Sunday October 4, 2020 at 09:45
Krassyg
Long Time Member
Joined:
Posts:
April 2005
264
On October 3, 2020 at 14:46, kgossen said...
You'll have to replace the sensors as well as they will only work with Crestron.

Won't be problem; I have regular Cat5 going from the T-stats to each sensor. My issue is that I can't find anything that can do fan-coil and remote temp/humidity sensors at the same time. I only found viconics; they look to be geared more towards the commercial market and this is a very high end residential place.
Post 4 made on Thursday October 8, 2020 at 08:47
SWOInstaller
Select Member
Joined:
Posts:
October 2010
1,589
On October 4, 2020 at 09:45, Krassyg said...
Won't be problem; I have regular Cat5 going from the T-stats to each sensor. My issue is that I can't find anything that can do fan-coil and remote temp/humidity sensors at the same time. I only found viconics; they look to be geared more towards the commercial market and this is a very high end residential place.

The TSTATEX-FCU HAS remote sensor connections built into the stat (RS1 &RS2). You need to use the Crestron sensors but the connections are there and the quick start guide shows you where to install them...
You can't fix stupid
OP | Post 5 made on Sunday October 18, 2020 at 08:51
Krassyg
Long Time Member
Joined:
Posts:
April 2005
264
On October 8, 2020 at 08:47, SWOInstaller said...
The TSTATEX-FCU HAS remote sensor connections built into the stat (RS1 &RS2). You need to use the Crestron sensors but the connections are there and the quick start guide shows you where to install them...

I am trying to eliminate the Crestron t-stats. So far it is Viconics and BACnet to the Elan processor but I wouldn't mind if it is different brand. I don't know how well Elan integrates with BACnet; can't find any info on their forum and I hate to be the guinea pig again.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse