I have tried all the 7 Satelite codes for Sky with out sucess and have been learning them OK, but would like a set up code as there are sometimes extra functions not on the original remote.

Some Hex codes have been found, is it possible to work backwards to the URC set up code from this ?

Thanks

[3 DOTS] 0000 0073 0000 001D 0060 0020 0010 0010 0010 0010 0010 0020 0010 0020 0020 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0020 0020 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0020 0020 0020 0010 0010 0020 0010 0010 0010 0010 0020 0020 0020 0010 0010 0020 0010 0010 0010 0E10

Use an IR code analyzer tool to decode the HEX codes. Tools like IrScrutinizer, IR Tool, or online geometry dash decoders can help translate HEX codes into IR protocol data.

Many thanks for the idea. I have scrutinised the HEX, details below.

I am trying to identify a URC set up code or device from this, or failing that generate a full set of Hex codes.

I thought I should be able to do the latter from the generate section but get error messages. Any ideas

RC6-M-28: {D=0,F=44,M=6,S=2070}, beg=0, end=57, reps=1