| Post 1 made on Wednesday January 30, 2013 at 13:37 |
jag_man653 Long Time Member |
Joined:
Posts: | January 2005
100 |
|
|
My MX-900 shows Versions as follows:
Edit: 1.0
S/W: 1.57
IR: 1.12
I have two questions. Are newer versions available? If so, how can I update?
I'm asking because my key presses don't always work and I've read here that it could be a firmware issue.
BTW, I bought it on eBay 4 years ago. I've always programmed it myself using the PC-based software.
TIA,
Ed
|
Ed S |
|
| Post 2 made on Wednesday January 30, 2013 at 16:53 |
goldenzrule Loyal Member |
Joined:
Posts: | July 2007
8,474 |
|
|
It's not a firmware issue but the widespread button failure issue. Search the forums and you will find plenty of info on it.
|
|
| OP | Post 3 made on Wednesday January 30, 2013 at 20:10 |
jag_man653 Long Time Member |
Joined:
Posts: | January 2005
100 |
|
|
Thanks. I did some searching and found the firmware mentioned as a cause, so latched onto that idea. Thanks to your suggestion, I did more searching and found that it's more likely a bad button contact issue. I might try to open it up and clean them up.
|
Ed S |
|
| Post 4 made on Thursday January 31, 2013 at 14:57 |
goldenzrule Loyal Member |
Joined:
Posts: | July 2007
8,474 |
|
|
Thats your best bet. Before you open it though, you might want to contact URC. They have repaired or replaced some out of warranty MX900s because of this issue. No guarantee they will, but worth the call.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
