I have been experiencing problems on installs involving MRF 260 base stations and mrf 350 base stations, LG TV's, both LED, and Plasma of different series. It started at my own home, I am running a LG 60PK550, with Anthem MRX700 AV reciever, DIRECTV HR23, Samsung BDP, URC MX900 & MRF350. All gear neatly stowed in Living room closet, and everything running on RF except the silly tv.

I have tried several different emitters, urc, nuvo, xantech, russound etc. I have positioned it in multiple areas around tv frame, starting with the obvious, on top of the sensor. However, I can not controll the tv with it. When I swith the code to IR and use remote's ir function, the codes work fine. I have tried adjusting the gain on base station, and have installed a xantech anteuator (sp?) and no luck getting it controlled by emitters. I have attemted to contact urc on this matter, and they were going to call me back, no word yet, I have posted on the URC controll room forum, no bites. Anyone have any ideas on what I could try next or what I am doing wrong.

I assume you have tried a different port on the MRF-350? Double checked the programing in CCP to make sure it's outputing to the right port? Is the divice set to the proper base station in ccp? Double check the polarity on your wiring?

Just throwing some ideas out there...

Thanks for the reply fixitnick, but you are correct, I have tried all those things, none of which at this time have helped.

If the TV has it you can try the "remote in" on the back of the LG but let me warn it can be a real PITA. Make sure you read this. I was having some LG issues just a few weeks ago. I just ended up embedding the emitter inside the tv.

The link above might be a work around if you have the remote in port available on your model.