Hi All,

Any chance someone has ir codes for HDMI 1 & 2, for the Harmon Kardon AVR 745 receiver? Same code for the AVR 445 & AVR 645, I believe.

Many thx Dave

Dave, I'm looking around for the very same thing. Did you ever come across any?

See my response here. Apparently they're separate commands that can be learned.

Guys,

Thanks for the input. I finally had the client learn them, from the Harmon Kardon TC30 remote, not the smaller remote. They did work, however, these are pronto hex:

As Mike mentions, should work on the AVR 745, 645, 445.

HDMI 1

0000 006C 0022 0002 0159 00AE 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 06BD 0159 0056 0015 0E7C

HDMI 2

0000 006C 0022 0002 0159 00AE 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 06BD 0159 0056 0015 0E7C

Good luck - Dave

Hi Dave,
You didn't ask this, but are there discrete ON/OFF codes for the HK family. I have a
HK340 that toggles. Sure would like to have discretes. Any thoughts??

The HK receiver will turn on with an input command, at least they used to 10 years ago.

Mike

Nice work Dave. You just ended some serious aggravation on my end. Thanks for posting these up, they worked great.

Andy

Hey Dave,

Can you please post the HEX code for HDMI 3 too? I have AVR 142 and it has a third HDMI input. I assigned HDMI 1 and 2 from your post and it works great.

Thanks in advance,
Naushad