Ok, I have never done this before so I am looking for a little help.
I have a customer that has a single URC lutron light switch in his theater. He has a MX900 that he wants to control his switch with.
I have never used this type of switch before and the URC tech support was somewhat helpful but not completely.
Tech support emailed me the commands for the switch and said that all I needed to do was copy the commands to the buttons and I was done. Then he hurried me off the phone before I could ask any futher questions. I turned to this forum while on site and saw that maybe I needed to create a phantom RF receiver for the lighting. I did and set the ID to "0". No dice...
All I can get the switch to do is when I press off the top light on the switch goes out, the bottom light on the switch flashes and the top light on the switch comes back on. No change in the lighting.
What can I be missing? I know someone is going to say to go to the training and I agree, but I am not the boss so I don't make that call. Any help would be appreciated.
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.