On January 7, 2010 at 18:01, yromj said...
I'll have to do some digging around, but I believe (99% sure) that the codes I used for HDMI selection (discrete, not HDMI toggle) came from here.
As for the signal quality, it's digital. It won't be affected. Just make sure your receiver's output resolution is set to "through" so it doesn't tinker w/ anything.
John
John, were you able to find out if the HDMI code was discrete or toggle. I can't find the discrete code for the AE3000 which will select HDMI 1 or HDMI 2 or HDMI 3, I have only been able to find the toggle.
Any help would be appreciated.
Cheers