Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Change RFID
This thread has 5 replies. Displaying all posts.
Post 1 made on Sunday December 6, 2009 at 20:25
Hart2Hart
Long Time Member
Joined:
Posts:
December 2005
485
I downloaded a ccp file from russound to control a cav6.6 system. I have several remotes and they communicate with a MSC400 using RFID 0A. The downloaded ccp file had a MSC400 config set for RFID 10. Therefore I selected the RF in port and changed the RFID to 0A to match my setup.

Problem is that changing the RFID caused RF control for an MX900 remote in the ccp file to change all IR Output selections to "All" and it will not let me select Port 7 Serial.

Can one change the RFID once created in ccp or how do I correct/work-around issue?
Post 2 made on Monday December 7, 2009 at 14:45
Surf Remote
Loyal Member
Joined:
Posts:
July 2001
5,958
With the MSC-400 simulator displayed, click on RF IN on the simulator. In the "Properties" window, you'll be able to change the RFID.

Mike
www.SurfRemoteControl.com

THX-certified video calibrator and contributing writer, ProjectorReviews.com
OP | Post 3 made on Monday December 7, 2009 at 15:30
Hart2Hart
Long Time Member
Joined:
Posts:
December 2005
485
Thanks. I located how to change RF ID but changing it messes up the RF control screen so that it forces "All" under IR outpuut and will not let me select the correct port 7 for serial output.
Post 4 made on Monday December 7, 2009 at 16:38
Surf Remote
Loyal Member
Joined:
Posts:
July 2001
5,958
Sorry, I misread your post. When I change the ID, I don't see anything changing in the RF control screen of the MX-900 in the Russound file. Is this after you merged the Russound file with your file?
www.SurfRemoteControl.com

THX-certified video calibrator and contributing writer, ProjectorReviews.com
OP | Post 5 made on Tuesday December 8, 2009 at 09:21
Hart2Hart
Long Time Member
Joined:
Posts:
December 2005
485
No this was just a change to the straight Russound file so I could download to a mx900 remote and test the serial connecttion between the msc400 and the cav6.6.
OP | Post 6 made on Tuesday December 8, 2009 at 18:27
Hart2Hart
Long Time Member
Joined:
Posts:
December 2005
485
Turns out that for Outputs >6 to be avialable, you must use RF ID 10 or greater.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse