| Post 1 made on Saturday November 8, 2008 at 19:23 |
InstallerCarl Long Time Member |
Joined:
Posts: | April 2006
206 |
|
|
I am having problems trying to get the dimmer switch to learn the RF signal from the remote. I follow the instruction for the dimmer switch and press and hold the switch for 8 secs. When the LED lights travel up and down I press and hold the "on" button on the MX880, but I receive no feed back from the dimmer switch. What am I doing wrong?
|
Carl |
|
| Post 2 made on Sunday November 9, 2008 at 20:09 |
tweeterguy Loyal Member |
Joined:
Posts: | June 2005
7,713 |
|
|
You are still pressing and holding the switch while pressing the ON from the lighting page, correct? Sure you have matching frequency devices? i.e. not mixing 418 with 433? You have set the device in programming and assigned an address, setup device as RF in programming and learned to the remote?
|
|
| Post 3 made on Saturday January 3, 2009 at 09:41 |
mhobizal Lurking Member |
Joined:
Posts: | January 2009
8 |
|
|
I've got the same problem with my MX-450. Tried all the different types in the light section and none of them work.
|
|
| Post 4 made on Monday January 5, 2009 at 21:19 |
RealDeal55 Lurking Member |
Joined:
Posts: | October 2008
8 |
|
|
I had the same problem with the MX-810. I was able to fix it which I detailed in this post. [Link: remotecentral.com]
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
