Hello gurus,

I found these printed ir codes for a Yamaha RS-KX1 Remote that is supposed to work with my Yamaha KX-W492 cassette deck.
I'd really like to put these to use in my MX-850. I've searched and tried the ProntoEdit but no luck.

Can anyone recognize the format? of these codes and help me out with using them?
______________________________________________________________________
"This config file has been automatically converted from a device file
found in the 06/26/00 release of the Windows Slink-e software package."

The original filename was: "yamaha rs-kx1 tape deck.cde"

begin remote

name RS-KX1
bits 32
flags SPACE_ENC
eps 20
aeps 200

header 8800 4400
one 550 1650
zero 550 550
ptrail 550
repeat 8800 2200
gap 38500
toggle_bit 0

frequency 38000

begin codes
PLAY 0x00000000FE0100FF
STOP 0x00000000FE01C03F
FFWD 0x00000000FE0140BF
REWIND 0x00000000FE01807F
SEARCH_FWD 0x00000000FE0150AF
SEARCH_REW 0x00000000FE01D02F
RECORD/PAUSE 0x00000000FE0120DF
DECK_A/B 0x00000000FE01609F
REC_MUTE 0x00000000FE01A05F
MONITOR 0x00000000FE01F00F
DIR_A 0x00000000FE01E01F
DIR_B 0x00000000FE0110EF
INTRO_SCAN_> 0x00000000FE017887
INTRO_SCAN_< 0x00000000FE01F807
DUBBING 0x00000000FE01906F
COUNTER_RESET 0x00000000FE01B04F
COUNTER_REMAIN 0x00000000FE01B847
COUNTER_MEMORY 0x00000000FE01708F
COUNTER_TAPE 0x00000000FE0130CF
end codes

end remote
____________________________________________________

Thanks for your help
Dave

You need to convert these to Pronto hex form. Search the "Discrete Hunter" forum for how to do this. You might also check and see if someone's already created a file in a useable format in the "Files" section of this site.

Mike

What is this "cassette deck" you speak of? Is it anything like those CD player thingys people used back in the day?

Try this from the Pronto files:

[Link: remotecentral.com]

It's one model # off but I'll bet it's the same. Save the file then open it from your Universal Browser in the MX-850 Editor and drag your codes over.

BTW, just kidding about the cassette deck.

Good luck.

Thanks for the reply.
I did try the KX-W392 file but it didn't work.
It only toggled the arrow indicating which transport - but would not play, rewind, etc.
Same thing with all the decks listed in the URC database.

I noticed that the printed code numbers didn't divide equally into groups of four.
I was wondering if that meant anything.
Also I didn't know what to do with the beginning sets of numbers.

(I have a lot of Theatre Pipe Organ concerts on cassettes that I'd like to revisit.
Thats why the interest in the cassette deck ! !)

Any other ideas out there ? Thanks . . . Dave