I was trying to learn codes from a Linksys DMA2200 Media Extender in to an MX 900. Most all of the learned codes work except for the up, down, right, and left navigation arrows. The problem i am having is once i learn the arrow buttons to the 900 and go to test them they only work once. Meaning if im at a menu screen where i can move between 6 selections right or left, the learned codes only let me move one. Same thing with up and down. If i pick up the original remote, however i can press up or down and it will move through as many choices are on the screen. For example, if i have 6 choices to my right and im highlighted on the first, i can press right 5 times on the original remote to get to the last choice. From any choice i land on using the original remote, the learned codes into the 900 will only let me move one spot left, right, up, or down. I tried using the learning option in the editor where instead of 1 time, you can try and learn a code twice. (not sure what its called) But everytime i did that on the second time it said "timeout" and fail the 2nd attempt. I tried the tapping learning method but that only made me move 3 or 4 spots in the menu when i pressed an arrow once. Any one have any advice with this unit or other remote learning issues with the same type of problem? Thanks for any help!! -Brian