Your Universal Remote Control Center
Philips Pronto NG Family Forum - View Post
Up level
Up level
The following page was printed from


Original thread:
Post 138 made on Thursday June 30, 2005 at 11:29
Long Time Member
January 2005
On 06/29/05 15:41 ET, Lowpro said...
I am using a standard set of Panasonic DVD IR
codes from the built-in database in conjunction
with my USB-UIRT and Girder to control Beyond
Media via my TSU7000. The IR codes used are clearly
identified in my IR codes device.

Below is a download link to my Girder file if
you want to try it out. This should be used in
conjunction with my current .pcf file just posted
for download today.

LP's Beyond Media Girder File:

Couple things worth noting on this deal ...
When setting this up I found that on a short or
firm button press each Girder event was executing
twice per what I was seeing in Beyond Media.
By setting the mimimum IR duration for these
Panasonic IR codes to .01 seconds in PPENG I found
that each Girder event was only executing once
as it should on a short button press. On a long
button press said Girder event was still repeating
rapidly as it should.

I also had some quirky navigation problems with
Beyond Media and some of the plugins I installed.
In Girder I had each event targetting the main
executable for Beyond Media, "SSBeyondMedia.exe".
By changing the target of each event in Girder
to target the foreground application
instead, the quirky navigation issues I was having
went away. I'd like to go back to targetting
Beyond Media directly as it will allow me to multi-task,
but for now I can live with Beyond Media needing
to be in the foreground.


Thanks for the Girder file, I'm going to play with this next week, and thanks for the tips. I figured I'd pick a set of codes I don't use and use them with Girder.

Thanks again. :)

Hosting Services by ipHouse