Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 5 made on Tuesday December 12, 2023 at 04:21
Barf
Long Time Member
Joined:
Posts:
August 2013
350
I encountered the same problem when trying to control a Yamaha receiver with Lirc. It turned, although the receiver reacted properly on the correct signal, it was very picky about the timing between the intro segment and the repeat, and between the repeats. These are the fifth last and the last number of the Pronto Hex. For reference here is the correct signal as computed by IrScrutinizer:

0000 006C 0022 0002 015B 00AD 0016 0041 0016 0016 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0016 0016 0041 0016 0016 0016 0041 0016 0016 0016 0041 0016 0041 0016 0016 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0016 0016 0016 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0016 0016 0622 015B 0057 0016 0E6C

As you can see, these numbers differs a bit, but not very much. You can try if changing these numbers make a difference.

The best thing would be to capture a working repeating signal, without repeat reduction and cleaning, and post it here.


Hosting Services by ipHouse