Your Universal Remote Control Center
Philips Pronto Classic Forum - View Post
Up level
Up level
The following page was printed from


Original thread:
Post 1 made on Wednesday April 6, 2005 at 15:25
Long Time Member
August 2003
My docking station seems to be broken. I have tested the transformer and it is working fine. My next port of call is replacing the fuse but I have a few questions first. I live in Ireland but have a US tsu6000.

1. From the forums I have found that the fuse has the following on it:-
bel ½ A
MS 125V

Is this an acceptable replacement that I found on the Irish Radionics site ([Link:]
Description Fuse, F, submin, PCB, axial leaded, fast acting, 125Vac, 500mA
RS Stock No. 422-034
Manufacturer LITTELFUSE
Part No. 251.500HAT1

If not then were can I get the right one.

2. What size Torque bit do I need to open the dock.

3. Can I do this easily myself. I have a soldering iron and a solder sucker. Is there any danger of me damaging other parts of the board.

Before I do this is there anything else I should try first. The battery is getting low (3 bars) but when I put it on the dock the Low Power symbol starts to flash. Is this normal.

Hosting Services by ipHouse