Your Universal Remote Control Center
URC's Consumer Remotes Forum - View Post
Up level
Up level
The following page was printed from


Original thread:
Post 71 made on Saturday March 15, 2014 at 23:40
Lurking Member
March 2014
On January 4, 2014 at 00:04, Daniel Tonks said...
The Dune uses standard NEC codes (I have one) so there should be no trouble learning functions. Incidentally, I had to learn those commands on my URC as well, although I tend to always learn things unless there's a specific reason to use preprogrammed codes (ie. toggle/parity bits).

You might wish to look at some of the tips here: [Link:]

This might also be a learning technique issue. Check the link I reference above. My best guess would be you're learning bursts instead of proper repeating signals.

Thanks for posting that link. I just finished setting up my R40 and really have been happy with it. Although that site prepped me that using the learn method would be non-trivial I was surprised at how difficult it was in my case. It seemed like none of the original remotes could be used with any confidence. I pretty much had to use my Harmony One to teach it and even then buttons would not take even after multiple attempts. Maybe I needed to be more patient or use some of the techniques at the site.

In spite of that I am extremely satisfied with daily use of the R40.

Hosting Services by ipHouse