Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 40 made on Thursday October 10, 2013 at 22:37
greg20152015
Long Time Member
Joined:
Posts:
September 2013
10
On December 2, 2009 at 15:51, ssabripo said...
ok guys, lets see if this helps some of you... finally got it working flawlessly:

download the latest microsoft mobile device center 6.1 (or later) 64-bit drivers directly from microsoft, and install. You may need .NET as well depending on your PC's installation.

Install CCP... when you get the error of "not compatible with your processor", don't worry.. just skip it.

Once done, Open CCP, and plug in your MX-980... you will see the Windows USB task message saying it is trying to install driver (it is actually looking for it online).

1. Go into the Device Manager
2. Look for Unknown device or Mobile device, Double click the icon for it
(if you are unsure, unplug the MX-980 and it should go away... you will then know you have the right device)
3. Click on the Driver tab
(here, you should see either no driver, or unknown driver, or URC Sync)
NOTE: Make sure you keep pressing a button on the MX-980 to keep it alive or it will time out and turn off!
4. Click update driver
5. Select "No not at this time"
6. Install from a list or specific location
7. Click don't search I will choose to the driver
8. Uncheck Show compatible hardware
9. Select Microsoft from the Manufacture list
10. Select Microsoft USB Sync
11. if you do not see this, you have to start over and keep trying until you get it.  Once it is installed correctly, you will see the USB windows driver message in the task bar say it was installed correctly and ready to roll.

Should now work with Win7 64-bit !!!!!  You should now see the Microsoft Mobile Device client app appear every time you plug in the remote...something like this:

I was having difficulties connecting in CCP with MX-5000 using Windows 7 64, I used these exact directions except I chose "Mobile device" and then selected Microsoft USB sync driver after downloading and installing Microsoft USB sync drivers for Vista 64... whew... then it finally connected in CCP and worked perfectly.

THANK YOU!!!


Hosting Services by ipHouse