 |
 |
|
|
Crestron Control Systems Forum - View Post
|
|
 |
|
10/24/22 - In searching for the perfect day, Timmy discovers something unexpected!
|
|
|
The following page was printed from RemoteCentral.com:
| Post 11 made on Friday August 3, 2012 at 04:05 |
Zephyr007 Long Time Member |
Joined:
Posts: | October 2002
213 |
|
|
Some Clarification....
"Static Mode: DM-MD32X32 Architecture
Diagram C.6 on page 14 illustrates the architecture of a DM-MD32X32.
Similar to the DM-MD8X8 and DM-MD16X16 architecture, the DM-MD32X32 assigns IP addresses based on addressable device numbers:
• Input cards utilize addressable device numbers 1-32
• Output cards utilize addressable device numbers 33-64
NOTE: In static mode, a fully loaded DM-MD32X32 can consume up to 65 IP addresses. It is important to set the IP
address of the switcher low enough so you don’t run out of addresses within the subnet (i.e., don’t set the IP address of a 32X32 higher than x.x.x.190 in a network with a subnet mask of 255.255.255.0)."
Having said all that DM v2.4 supports a single IP address for the Switch, Input Cards, & Output Cards.
| |
|
|
|
|
|
|
|
|
