Your Universal Remote Control Center
RemoteCentral.com
Crestron Control Systems Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 11 made on Monday August 22, 2011 at 09:41
mlafayette
Long Time Member
Joined:
Posts:
May 2011
19
If you're on the local network, there is no port forwarding... If you're coming from outside the LAN, make sure you have the correct external IP, http://whatismyip.com and check under Toolbox to see what web port the processor has, likely it's 80, but check. Then just forward 41790 and 41792 to the processor, and same with the web port. Should be it.


Hosting Services by ipHouse