Nevermind, just realized I can't run a trace off-site. I am now back at home. I didn't save the trace, so I apologize.

I don't use the display power on preset. I don't want it trying to control the TV's on it's own. I make the preset for display power on blank. Then, under PROGRAMMABLE EVENTS for RECEIVER DEVICE -> Two Zone Volume Extender, there is where I put all my IR Codes for what I want it to do when that room's sources are selected.

For example, in this list, there is a Source_'DirecTV:Line-Level Audio'_Selected (Rising Edge)', under that I have the following commands (in this order:)

Pulse Keeping Room, Display Device-->POWER_ON for 0.2s
Delay for 2s
Pulse Keeping Room, Display Device-->POWER_ON for 0.2s
Delay for 2s
Pulse Keeping Room, DirecTV-->POWER_ON for 0.2s
Delay for 2s
Pulse Keeping Room, Receiver Device-->POWER_ON for 0.2s
Delay for 2s
Pulse Keeping Room, Receiver Device-->Video2_CBL/SAT for 0.2s
Delay for 2s
Pulse Keeping Room, Display Device-->HDMI_1 for .2s

Now I have a bunch of delays, but i've trained my customers to be patient. This system is all IR, no serial, so I wanted it to be as solid as possible using IR.

Let me know if there's anything else I can offer since it seems we're using the same display.