Your Universal Remote Control Center
One For All & Radio Shack Forum - View Post
Up level
Up level
The following page was printed from


Original thread:
Post 39 made on Wednesday January 26, 2011 at 13:57
Lurking Member
January 2011
Just purchased a Viore 24" model LED24VF60 and of course my Charter Cable remote control did not have the Viore brand listed as a TV code but I did get it to work by searching for the code. Look in your remote control's manual and follow the instructions, it DID work work for me--I can control the TV's volume (and mute) and turn it on/off.

For the Charter OCAP 4-Device Remote Control (by Universal Electronics) the procedure for searching for a TV code is as follows:

1. Turn on TV
2. On the remote, press TV once (TV key blinks once). Then press and hold SET UP until the TV key blinks twice.
3. Enter 9 9 1 (TV key blinks twice).
4. Press 1 (TV key blinks twice).
5. Aim remote at TV and press Power.
6. Press and release the CH+ key continuously, then stop when TV turns off.
7. Press Power. The TV should turn on, then press SET UP to lock in the code.

Note: If the TV does not turn on in step 7, then slowly press and release CH- to go back through the codes, then press SET UP when the TV turns on.

Hosting Services by ipHouse