On September 27, 2010 at 22:53, 39 Cent Stamp said...
Another thing for you guys to remember when coming from 1 way land to crestron. Sometimes the 'lock up' is a communication issue and not always a hardware issue.
VTPro page flips will work but things driven with join numbers wont move or function making it appear that the panel is locked up. Hard booting with the power button or removing the battery usually fixes this but thats only because its forcing it to go out and reestablish the communication. Check your signal strength if this is a reoccurring problem.
In this project that I'm having the problems the Family room (PTX3) is about 30-40 feet MAX (walking distance) to the rack and processor. I have two EX dimmers half way in between plus an EX dimmer in the Family Room. Because of this my signal is 90+%.
HOwever, that's exactly what I was thinking it could be as well. Perhaps some RF interference is bogging up the system for a second.
