Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto Remote Control File Area
Up level
Up level
The following page was printed from RemoteCentral.com:

Before you continue!

This file area has been replaced with a newer one!
As of 2011, this section is no longer being updated, and some files may show as unavailable. For free access to all of these downloads and many newer ones, visit our NEW file area at: http://files.remotecentral.com

You are currently browsing through the Philips Pronto & ProntoPRO, Marantz RC5000, RC5200 & RC9200, Onkyo CHAD and Yamaha RAV-2000 file area. To return to the beginning click here.

 Files > Pronto > Devices > Bose > Audio System > Details (Rate File)
Add your rating for this Philips Pronto file!
Please enter your Remote Central user account information to vote:
User name:
Password: Get a password! 
Your vote:Thumbs up!
Average...
Thumbs down!
Once you have voted for a file you may not vote for that same file again. Remember that your vote is applied to all segments of a file. So, even if you may have only evaluated a single element, your rating should reflect the file as a whole. Below you will see all aspects of this file as entered in our database.
The file you are rating is as follows:
Bose Lifestyle 28 & 35
(Remote model RC-28T)
Designed for:
Philips Pronto TSU2000
Submitted by:
DJ Wood
v3.0 This file was created using the latest version of IR commands generated for the Lifestyle 28 & 35 media centers (w/ software version SW C: 01.03.02). Lifestyle® 28 or 35 systems running this (or later) version or console software will provide the user with the ability to operate the Zone 2 speaker zone in addition to the original Zone 1 speakers.

Systems that have an older version of console software (i.e. 01.01.01) would need to update this software using an update CD-ROM, available through Bose Product & Technical Support. Request software update "01.03.02" or later.

To verify the software on your system:
1. Turn off the system.
2. Hold down the STORE button on the front.
3. While holding STORE, press ENTER.
4. Write down the code displayed.

Systems with software version 01.03.02 SHOULD correctly operate Zone 1 (Main Room Home Theater) AND Zone 2 speakers via this CCF file. Systems with the following older software will require the above mentioned software update CD-ROM in order to operate your system with the enclosed version of IR commands.

082101 - Software released with first generation Lifestyle systems
092501
111301
01.01.AS - First systems with known changes to IR protocol
01.01.00
01.01.01 - Lifestyle System software after software update using separate "ADAPTiQ Completer Kit"

Return to the file area.


Share with the remote control community
by uploading a file to Remote Central!

Hosting Services by ipHouse