|
|
Brian Steeves' System For: HTM MX-700 (System) By: Brian Steeves | Here is a complete system configuration including macros and learned codes for most of the devices that are not in the HTM database. |
|
|
Brian Troy's MX-700 MXF For: HTM MX-700 (System) By: Brian Troy | This system file has been a work in progress until recently. I feel that the "POWER" page helps just in case one of your TOAD devices is out-of-sync. I also added a "GOTO" page where I stored all my switching macros. |
|
|
Chris Rouvalis' System For: HTM MX-700 (System) By: Chris Rouvalis | This is the beginning parts of my new home theater. I hope some of these codes, macros, and LCD button layouts can be of use! |
|
|
Chuck Hutchins' MXF For: HTM MX-700 (System) By: Chuck Hutchins | A complete MX-700 setup with discrete codes. |
|
|
Complete System with Zone 2 For: URC MX-900 By: psujoe | Have made some tweaks to better control things and relocate buttons. Feedback is welcomed. Hope this helps others. Any feedback is welcomed. |
|
|
DJ Garcia's MXF File For: HTM MX-700 (System) By: DJ Garcia | A complete system MXF file with a large number of devices. |
|
|
Damian Anzelmo's MX-850 For: HTM MX-700 (System) By: Damian Anzelmo | The 1st LCD page has the macros on the left of the LCD screen and the device components on the right. Buttons right of the LCD control the macros and buttons left of the LCD control the device components. After the macro executes it defaults to the device’s LCD control page. Favorite channels are for the Dish Network DSS system. This is my 1st attempt at programming the MX-850, I’ve had it for a week. |
|
|
Daniel's Bedroom Setup For: HTM MX-700 (System) By: Daniel Tonks | My complete bedroom television system as used with an MX-800 remote control. Utilizes simple device-switching macros and offers complete component control. Works well with both inexperienced users and the technically savvy. |
|
|
Daniel's Home Theater Setup For: HTM MX-700 (System) By: Daniel Tonks | My complete home theater system on the MX-800 remote control. Utilizes simple device-switching macros and offers complete component control. Works well with both inexperienced users and the technically savvy. |
|
|
Darin Cline's Setup For: HTM MX-700 (System) By: Darin Cline | Not yet complete. The main purpose of this file is to show the use of press & hold macros. Each device button on the main menu is a press & hold macro... press normally, and the required components turn on & get set to the appropriate settings, and the remote is switched to that device page. Press very quickly (0.1 seconds) and the remote switches to the device page, but none of the macros are run. For me, this is more convenient that the standard method of bypassing the macros by holding down the MAIN button while hitting the device button. Press & holds are also used in the TiVo and DVD devices to combine multiple commands into one hard button... FF becomes forward skip if you hold it for more than 0.2 seconds, RR-rear skip, play-1 minute jump, pause-slomo. Also, the power off on individual devices turns off only that device if you press less than 0.1 seconds, or the whole system turns off if you press normally (more than 0.1 seconds). |
|
|
More System Files: [ < Back | Next > ] Return to the Complete System Setup Files index. |