The following page was printed from RemoteCentral.com:
Before you continue!
This file area has been replaced with a newer one! As of 2011, this section is no longer being updated, and some files may show as unavailable. For free access to all of these downloads and many newer ones, visit our NEW file area at: http://files.remotecentral.com
You are currently browsing through the Philips iPronto TSi6400 file area. To return to the beginning click here.
This file contains IR codes and button formats, complete with macros for the system I assembled. Hope it's helpful, thanks for your file donations as well.
First of all, a massive thank-you too Kees van der Meer's Platinum design on which this layout is heavily based. I've enlarged the menu keys and added pressed state buttons to all icons. I've also tried to keep all the icons the same on every page, ie. the play and rewind buttons are in the same location on Sky, iDock and PS3. Most devices are on one page, to keep things simple and to save time. All my surrond sound keys are on the far right. Hope you like it.
On the home page there is two separate macros for turning some of the kit on/off. All other buttons are links elsewhere. In addition to standard commands, the amp device contains a couple of macros for setting screen input, amp inputs, DTS/Dolby settings etc. Used to control the following devices:
A 4 zone/6 source A/V system. Page jumps provide zone/source feedback; page jumps provide amfm button feedback; all sources/matrix located in rack and routed to 4 tvs; NETX RF used for all rack equipment including matrix; IR used for tvs; the program is complicated but upload to your ipronto to see it work. AM FM preset buttons were tricky for this tuner (no discrete IR preset buttons available). Thanks to Kees van der Meer's button gallery!
