The following page was printed from RemoteCentral.com:
This Wiki entry is maintained by Remote Central members - so if you spot an error or have additional information, please update it!
|Configurations:||Search the file area|
16.56" wide × 7.38" high × 18.06" deep
42.06 cm × 18.75 cm × 45.87 cm
|Notes:||A good receiver with discrete codes all available in a ccf on the pioneer website under custom install. Receiver runs very cool and supports Sirius/XM adapter. Home Network option allows you to watch control some media over your wired network. Simply connect ethernet cable to receiver.|
Some quick specs:
Power Ratings: 7 x 140 watts per channel (8 ohms, 20 Hz-20 kHz, <.09%THD)
Audio DAC: 192 kHz/24bit DAC x 7
HDMI: 1.3a with support for Deep Color, 24p and SACD/DVD-Audio support
Crossover: 50, 80, 100, 150, 200Hz
Video Inputs: 4 x HDMI (1.3); 3 x Component Video (100MHz); 7 sets composite and S-video inputs
|IR Input Jack:||Yes|
- 418 MHz
|IR Output Jack:||No|
|Power On:||4.00 seconds|
|Switch Inputs:||0.40 seconds|
|Important Codes & Commands|
RS-232 requires a command to "wake up" unit before a command is recognized. A Power on command needs to be sent twice and a power off as well. Other little unorthodox behavior with 232 exists.
No files have been uploaded for this model.
Use the red Wiki Toolbox below to upload a file!
About this page...
This page contains information on how the Pioneer VSX-94TXH can be controlled, along with useful tips, tricks and commands to make integrating this device into a universal remote control or other control system faster and more reliable.
This entry was last updated on Wednesday April 29, 2009 at 16:36 by Total Control Remotes.