The following page was printed from RemoteCentral.com:
This Wiki entry is maintained by Remote Central members - so if you spot an error or have additional information, please update it!
|Configurations:||Search the file area|
|Notes:||Use Null Modem adapter if using serial control by default. IR emitter on back (right side if facing the back of the projector) . No IR input, but full discrete control as well as inputs.|
Serial protocal available in Pronto and RTI library. Uses same codes as other models in this series (DLA-RS1, RS2, DLA-???).
Lamp & Housing: Expect to pay $300-$350
To shut down, press power off, then press power off (1.2 sec delay)
|IR Input Jack:||No|
|IR Output Jack:||No|
|Power On:||9.99 seconds|
|Switch Inputs:||9.99 seconds|
|Important Codes & Commands|
No files have been uploaded for this model.
Use the red Wiki Toolbox below to upload a file!
About this page...
This page contains information on how the JVC DLA-HD1 can be controlled, along with useful tips, tricks and commands to make integrating this device into a universal remote control or other control system faster and more reliable.
This entry was last updated on Friday April 24, 2009 at 14:49 by Total Control Remotes.