Hello, i recently purchased a used Curtis international tv dvd combo LEDVD2488A-B and did not come with a remote. I tried to contact Curtis international but they are saying it will take 15 days before it even ships out. Anyone know of a good universal remote that would work for me? Thanks a ton!

I dont know if it would help but in the manual it sais the universal remote code is 007F. Does anyone know what that is converted? Thanks

I looked in the manual, and it appears that the IR protocol is NEC1, device 0.127  (127 expressed in hexadecimal is 7F).  Other Curtis TVs use this same IR protocol.  The diagram of the remote in the manual then shows all the function numbers for the buttons, so we know each IR command.

However, I'm not aware of any cheap universal remote that has this set of commands built in.  You can program a RCA RCRP05B to control the unit, using setup code TV 1548.  The remote won't control the TV until you've programmed each button with a 5 digit EFC.  Let me know if you're interested in doing this and I'll convert the function numbers into the EFCs.

Any help would be great! I tried an 18$ Phillips universal remote from Wal-Mart it said it worked with Curtis TVs and tv DVD combos but it wouldn't work for me unless maybe I did something wrong. Really the only thing I need the remote is for the ok button and the DVD eject button I have no way to play movies or eject them or change source i guess. But again Amy help would be appreciated!

The remote I picked up is a Phillips SRP5107/27. Would this work? I can take it back tomorrow and swap it out for the RCA RCRP05B. I'm not sure how to individually program buttons tho is their maybe a tutorial? My google attempts haven't brought up much for me. Thanks again I really appreciate it!

The Philips won't work; only certain remotes made by UEI can be manually programmed this way.  Assign setup code 1548 or 2189 to the TV button (or use the 992 command to convert some other device button to TV type). Use the 994 command to assign the following EFCs to buttons.  However, you can't assign an EFC to the Power button, so use something else, e.g. Live.  The 3rd column below is the function number and I've included it to help others who may want to convert to Pronto Hex.  
 
0 00181 0
1 00185 1
2 00183 2
3 00187 3
4 00180 4
5 00184 5
6 00182 6
7 00186 7
8 00053 8
9 00057 9
last (prev ch) 00055 10
dash 00059 11
up arrow 00052 12
down arrow 00056 13
right arrow 00054 14
left arrow 00058 15
select 00117 16
menu 00121 17
source 00119 18
exit 00123 19
display 00116 20
power 00120 21
mute 00118 22
mts/mp3 prog 00122 23
channel down 00245 24
channel up 00249 25
vol down 00247 26
vol up 00251 27
sleep 00244 28
P mode 00248 29
S mode 00246 30
EPG/ D setup 00165 64
fav- Stop 00169 65
fav+  play/pause 00167 66
fav/ eject 00171 67
next track 00164 68
prev track 00168 69
fast fwd 00166 70
rewind 00170 71
subtitle 00037 72
audio 00041 73
Angle 00039 74
zoom 00043 75
D disp 00036 76
Goto 00040 77
D title 00038 78
D menu 00042 79
A-B 00101 80
repeat 00105 81
Step 00103 82
prog 00107 83

Your a life saver thank you soo much! I'm going to give this a try tomarow and see if I can figure out how to program this! Thanks again!