| Post 1 made on Wednesday August 12, 2009 at 15:33 |
Dashsa Lurking Member |
Joined:
Posts: | August 2009
1 |
|
|
Hello,
I am programming a MX6000 to control a Lutron Series 4 processor through a MSC 400. I can get the button presses to work and I am able to control the house lights so that they can turn on and off. I am unable to access the raise/ lower. From what I understand I should be able to raise/lower the last keypad pressed.
The RS232 commands to turn the lights on and off are: KBP,[01:06:11],11
this controls a button that is toggle on/off.
And I was told that I need to stop the button press for the Raise lower?
Has anyone figured this out before?
Thanks!
|
|
| Post 2 made on Wednesday August 12, 2009 at 23:32 |
39 Cent Stamp Elite Member |
Joined:
Posts: | May 2007
17,518 |
|
|
Check this thread. Its for RTI but it may help you understand how to do raise and lower. [Link: remotecentral.com]
|
Avid Stamp Collector - I really love 39 Cent Stamps |
|
| Post 3 made on Thursday August 13, 2009 at 09:03 |
thefish Founding Member |
Joined:
Posts: | September 2001
1,721 |
|
|
I can't help you with URC, but my RTI string that works is:
KPB,[01:06:17],23\r
Pause until button is released
KPR,[01:06:17],23\r
01:06:17],23 is button 23 on a phantom keypad set to master raise.
|
|
| Post 4 made on Sunday August 23, 2009 at 04:46 |
thoupis Long Time Member |
Joined:
Posts: | August 2007
124 |
|
|
You need to issue a release string when you depress the button.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
