Post 1 made on Friday October 12, 2018 at 21:23 |
Krassyg Long Time Member |
Joined: Posts: | April 2005 264 |
|
|
I have a UN65NU8000 working with serial over EX-Link but the TV won't turn on sometimes. Looks like some kind of a power saving issue. I turned on IP Control in the regular menu to get serial going; anything else I'm missing? Something in the service menu?
|
|
Post 2 made on Sunday October 28, 2018 at 18:50 |
Sunset AV Lurking Member |
Joined: Posts: | October 2018 2 |
|
|
Same issue with 2018 Q9
RS232 Codes confirmed and working for Power On and Power Off, when TV is on.
However, if TV is off for over 30 seconds, it will not come back on with "Power On" RS232 command.
Sharp TVs RS232 use to have a "wake up" RS232 command to send before "power On" would work.
|
|
Post 3 made on Thursday November 1, 2018 at 15:47 |
edfraney Long Time Member |
Joined: Posts: | April 2003 15 |
|
|
Same issue with the 2018 Q9, Q8 and Frame 65 and 55.
I will post the solution when I figure it out.
|
|
Post 4 made on Thursday October 24, 2019 at 18:58 |
Sunset AV Lurking Member |
Joined: Posts: | October 2018 2 |
|
|
Has anyone found a fix for this?
I looked in the service menu but could not find anything to do with ExLink/RS232
|
|
Post 5 made on Thursday October 24, 2019 at 21:56 |
remoteCtrlAuto Long Time Member |
|
|
At least for Samsungs that use MDC Protocol (ME Series, and others), you have to retry to send command for "PowerOn" or "PowerOff" 3 times every 2 Seconds until ACK command. If there is no ACK within 3 times, It means failure.
Also check tv menu:
System -> Eco solution and System -> General
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.